PCIe 3.0

Innosilicon PCIE 3.0 PHY &控制器controller IP是一种高度可编程的模块，可将高速串行数据处理为与英特尔 PCIE 3.0 超高速标准的 PHY 接口兼容的并行数据。 PHY 支持 PCIE 3.0(8Gb/s/5Gb/s/2.5Gb/s) 物理层规范。

PHY 模块集成l 物理媒体附件 (PMA) 层和物理编码子块 (PCS) 层。

The Innosilicon PCIE3.0 PHY is a highly programmable module that processes high-speed serial data to parallel data compatible with the PHY Interface for PCIE3.0 Super-Speed standard from Intel. The PHY supports PCIE3.0(8Gb/s/5Gb/s/2.5Gb/s) physical layer specifications.

The PHY module includes a top level wrapper integrating both the Physical Media Attachment (PMA) layer, and the Physical Coding Sub-Block (PCS) layer.

KEY FEATURES:

Standard PHY interface enables multiple IP sources for PCI
Express Logical Layer and provides a target interface for PCI
Express PHY vendors.
Supports 2.5Gb/s only or 2.5Gb/s,5.0Gb/s and 8.0Gb/s serial data transmission rate
Utilizes 8-bit, 16-bit or 32- bit parallel interface to transmit and receive PCI Express data
Allows integration of high speed components into a single func tional block as seen by the endpoint device designer.
Data and clock recovery from serial stream on the PCI Express bus
Holding registers to stage transmit and receive data
Supports direct disparity control for use in transmitting compliance pattern
8b/10b encode/decode and error indication
128b/130b encode/decode and error indication
Receiver detection
Beacon transmission and reception
Selectable Tx Margining, Tx De-emphasis and signal swing values
Receive Equalization training

INNOSILICON ADVANTAGES:

As with all Innosilicon IP, the focus is on silicon proven, fully certified solutions providing
Small size
Low power
High ATE coverage
Simple integration
Flexible customization

BLOCK DIAGRAM:

EXAMPLE APPLICATIONS:

一键启动，简化您的下一个产品设计流程！

输入您的IP需求